ROSCO Chroma Key Ink Green 0.95L
Green Chroma Key Ink with 0.95L and a yield of 8.7m2 per liter.
FINISH: matte.
SOLVENT: Water.
TYPE: Vinyl Acrylic.
USE: Use directly from the can. If necessary, dilute with water. Thinning Chroma Key inks can make the coverage less uniform.
SURFACE PREPARATION: Surfaces must be clean, dry and free of dirt and grease. First porous surfaces, except fabrics, using Rosco Tough Prime. If painting a new plaster surface, prime the wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation.
APPLICATION: Mix the contents before using. Do not shake. Apply with a brush, roller or gun. Apply in thin, even layers, using a good quality brush or roller. Use overlapping strokes while maintaining a wet edge. Change the direction of the roll frequently to avoid patterns and streaks.
FILM THICKNESS: 2 mil. Dry Film.
VOC CONTENT: Maximum 50g/L.
COVERAGE: Appx 300 square feet per gallon.
AVG. DRY TIME: At 24°C (75°F) Dry to the touch in 30 minutes. It can be recoated in 1-2 hours.
CLEANING: Soap and water.
Box Contents:
1x Green Chroma Key Ink 0.95L