DJI POWER 1000 V2
DJI Power 1000 V2 offers a battery capacity of 1024 Wh and supports a continuous output of 2600 W until the battery is depleted, reliably powering more than 99% of everyday devices. It also supports fast charging of DJI drone batteries, improving efficiency in content creation. In emergency situations and home backup, it can connect up to five 2048 Wh expansion batteries, increasing capacity to a whopping 11,264 Wh and offering robust backup power for home electricity needs.
Super-fast charging for DJI drones
When used with compatible accessories, the DJI Power 1000 V2 enables SDC super-fast charging for select DJI drone batteries, allowing for takeoff in just half an hour. With three drone batteries, you can fly and film continuously all day long.
Air 3 Series Intelligent Flight Battery
Approximately 30 minutes
Battery level from 10% to 95%
Inspire 3 TB51 Intelligent Flight Battery
Approximately 28 minutes
Battery level from 10% to 95%
* The above load time data was measured in a controlled test environment and is for reference only.
Fast and flexible recharging
The DJI Power 1000 V2 can be recharged through the power grid, solar power, and car power. Whether you're at home or on the go, you can choose the best charging method, ensuring a reliable power supply and increased convenience.
Grid power
It's quick and easy to connect, recharge, and use. When connected to the mains, it takes just 37 minutes to go from zero to 80% [7] and 56 minutes to fully charge. Even if you start charging just before you leave, it gives you the confidence to leave whenever you need to.
Solar energy
Cost-effective and environmentally friendly, the DJI Power 1000 V2 can be recharged via the DJI Power Solar Panel Adapter Module (MPPT) or the DJI Power 1.8kW Solar/Car Super Fast Charger with up to 1800W solar input, taking only 40 minutes to charge 1024 Wh.
Car power
Easily supercharge any car trip with the DJI Power 1kW Super-Fast Car Charger or the 1.8kW Super-Fast Solar/Car Charger. These chargers utilize excess electricity from your car's alternator to quickly recharge DJI Power 1000 V2, which is suitable for regular cars and recreational vehicles. With expansion batteries, it takes only 78 minutes to charge the power station from zero to 100%.
Enhanced safety design
Safety is a top priority for the DJI Power 1000 V2, with meticulous attention paid to every detail, from the body structure and chemical composition of the cells to the system software.
For the battery cell, we choose LFP (lithium iron phosphate). It is safe and does not explode even if punctured. It has a long service life, retaining 80% of capacity after 4000 cycles. With one full charge cycle per day, it can last for ten years.
The intelligent battery management system (BMS) provides comprehensive protection. With 19 temperature sensors constantly monitoring heat dissipation, the device operates normally even at high temperatures of up to 45°C (113°F). In addition, 25 fuses provide circuit protection for each module. If the safety limit for electricity use is exceeded, the protection mechanism for power supply and recharging is automatically activated, leaving no room for accidents.
The BMS system uses a new encapsulation process to protect the inverter, ensuring safe operation in rain, condensation and salt spray conditions. This makes it ideal for worry-free use while camping by the sea or driving in high-altitude areas.
The power station is made of flame-retardant materials, ensuring that drops and impacts do not cause open flames. It also has a static pressure withstanding up to 1 ton, making it exceptionally reliable.
Continuous power backup
When an electrical device is connected to a DJI Power 1000 V2 powered on through an AC output port and both are receiving power from the mains, the Power 1000 V2 automatically enters UPS (Uninterruptible Power Supply) mode. In the event of a sudden power outage, DJI Power 1000 V2 can start powering the connected device(s) in 0.01 seconds, ensuring continuous operation and giving you peace of mind.
Sleep without being disturbed with ultra-quiet performance
While charging, the DJI Power 1000 V2 operates at a noise level of only 26 dB, making it virtually imperceptible even in quiet environments. Whether camping overnight or lounging indoors, it runs quieter than the wind and no noisier than a quiet air conditioner.
Two 140W USB-C ports for next-gen fast charging
The DJI Power 1000 V2 has two 140W USB-C output ports, providing a total of 280W, which is 40% more than the typical 100W USB-C port configurations available on the market. It easily meets the demands of most USB-C devices and supports PD 3.1 fast charging up to 140W for high-performance laptops.
Remote control via app
The DJI Power 1000 V2 can be connected directly to the new DJI Home app. The interface is simple and intuitive, allowing you to remotely turn the AC output on and off, adjust parameters, and monitor power status in real-time. In addition to the power station itself, you can also view and adjust the parameters of the expansion battery and the 1 kW and 1.8 kW super-fast chargers. No matter where you are, you can easily manage DJI Power devices for a smarter and more efficient experience.
Wide range of accessories
The DJI Power 1000 V2 features two USB-A ports, four AC output ports, one SDC port, one SDC Lite port, and two 1/4" threaded ports, allowing you to connect to various DJI Power series accessories, different models of solar panels, power cables, and adapter cables.