PHOTTIX Odin II TTL Receiver for Nikon
Take advantage of the full potential of your flash settings by adding wireless activation and control with the Odin II receiver . Compatible with Canon and Nikon TTL system and equipment with 2.4GHz radio transmission.
Advantages:
Compatible with Odin, Indra, Miters+, Strato, Strato II and Atlas II
Firmware upgradeable via mini-USB port
AF Assistant Light
Flash zoom control
Modeling light control with Indra flashes
TTL control at +/- 3EV
Manual control from 1/1 to 1/128
High-speed synchronization up to 1/8000s
2nd curtain sync (Nikon and Sony compatible only)
2.4GHz radio transmission up to 100m distance
With 5 groups (A, B, C, D)
With 32 Channels with Digital ID
LCD display and direct access buttons
The Odin II receiver can be used mounted on hot shoe flahes or studio flashes , as well as can be triggered by the Odin or Mitros+ up to a distance of 100m. For added benefit in use, it can also be used with a multi-system setup, involving the Odin TTL, Strato and Strato II receivers, but also with the Indra and Mitros+ flashes.
This version II of Odin comes with more channels, introduction of Digital ID (digital identification), which gives you greater control over the 5 groups and 32 channels, in order to eliminate interference with other systems.
By establishing TTL communication between the flash and the camera, automatic exposures can be made more easily and more advanced users can take advantage of its manual power and zoom control to look exactly the way you want.
By using the 5 groups, users can control different groups of flashes with different configurations, as well as allowing them to combine TTL with manual flash units. All this, with easy access via the LCD, along with direct access buttons for groups, and a rotary knob to quickly adjust settings.
Additional features of this product include both high-speed sync for TTL flashes, as well as OverDrive sync mode for manual studio flashes, which allow users to work at speeds up to 1/8000 second. In addition, you can also remotely control the modeling light of your Indra flashes, as well as use an AF auxiliary light when needed. Not least, you also have a mini-USB port on your Odin II for firmware updates, a 3.5mm sync port and a 5V power port. It can also be powered by 2 AA batteries.
Warning: This product is the receiver only. Transmitters are sold separately.
Box Contents:
1x Odin II TTL Receiver for Nikon
1x Instruction Manual
