SNIPER Radio Remote Trigger 2*IS-SNP
Long operating range, very low failure rate, all-in-one all-in-one
The operating distance can be up to 500 meters in an open area, with no obvious obstacles and no interference;
The average hit rate can be more than 90% within the operating distance.
The maximum SYNC speed can reach 1/500 second — depending on your camera, the Nikon D70, D40 can achieve this;
The product is compatible with many flashes, including all major Canon models, Nikon flash in wireless non-TTL mode, as well as many different studio lights.
The product is an essential gadget for creative photos, with the ability to control up to 3 groups of flashes wirelessly. When the device is set to flash mode, remotely control the flashes from the A/B/C groups separately. When the device is set to camera mode, the A/B/C group selector will function as the camera's T/B/N selector.
The product can also act as a wireless remote control of the shutter and support the autofocus function of the camera. In shutter control modes, you can shoot with a 4-second delay, lamp shots, and continuous shots.
Each individual device can act as a transmitter or receiver, being configured and designed in a perfect and classic way.
When in flash mode and TX status, you can activate the flash in wireless standby mode (within the applicable range) by pressing the button fully; when in camera mode and TX status, you can activate the camera's autofocus function by pressing the button halfway, and you can take a photo by pressing it all the way.
The signal from the camera hot shoe will go straight to the device's hot shoe. When the device is mounted on the camera hot shoe, if there is a flash also mounted on the device's hot shoe, it will be fired, just like other wirelessly connected flashes.
The PC SYNC socket and 2.5mm shutter control socket offer more expansion functions.
Operates in the 2.4 GHz frequency band – operates in the ISM frequency band and can achieve accurate and seamless communication with encryption and decryption technology.
Anti-interference with 16-channel switch – comes with 16 individual channels that can help eliminate signal interference and greatly improve reliability.
Confirmation Indicator to Display Failure/Success Signals – Dual LED to clearly indicate the status of the receiving and sending signal operation.
Integrated voltage sensing circuit – intelligent power management
Supports rechargeable batteries - it is compatible with AA alkaline batteries, as well as Ni-Cd, Ni-MH, lithium-ion and other rechargeable batteries.
Dustproof and Waterproof Design – To achieve a longer service life, some core components are protected by a dustproof and waterproof double layer.
Box Contents:
1x SNIPER Radio Remote Trigger 2*IS-SNP
