VILTROX DG-M43 Micro 4/3 Autofocus Macro Extension Tubes

1. Mount the TUBE first to the lens. Align the point of the tube (for the lens) with the point of the lens. 
Then rotate the TUBE clockwise until it stops with a click. 
Be sure to keep the electronic contacts clean to ensure proper connection.

2. Mount the combo TUBE to the camera body the same way you mount the lens to the camera. 

 3. By using 1 or 2 TUBES in combination, they can be combined freely. 

 4. To disassemble the TUBE and lens from the camera, press the release button on the camera and rotate the TUBE counterclockwise. 

 5. To disassemble the lens from the TUBE, press the release button on the TUBE and rotate the lens counterclockwise.
This high-quality auto macro extension tube assembly is designed to allow a lens to focus closer than its normal set minimum focusing distance. 
Zooming in has the effect of magnifying the subject (making it appear larger in the viewfinder and in photos). 
They are exceptionally useful for macro photography, allowing you to convert almost any lens into a macro lens at a fraction of the cost while maintaining its original optical quality.

DG extension tubes have no optics. 
They are mounted between the camera body and the lens to create more distance between the lens and the film plane. 
By moving the parent lens away from the film or CCD sensor in the camera, the lens is forced to focus much closer than normal. 
The longer the length of the extension tube, the closer the lens can focus.

Comes together (10 mm + 16 mm). 
It contains 2 tubes of different lengths 10mm / 16mm, which can be used in any combination or individually to obtain the different magnifications.

Designed with electronic contacts, which make it compatible with auto focus, auto exposure, etc. It allows you to use all camera shooting modes, exposure compensation is required.

Box Contents:
1x 10mm Extension Tube
1x 16mm Extension Tube
1x Front Cover
1x Back Cover