SONY ECM-W3S Wireless Microphone

Record one-on-one interviews and vlogs with your Multi Interface compatible Sony camera using this SONY ECM-W3S wireless microphone system, thanks to its clip-on transmitter with integrated microphone and single-channel receiver with Multi Interface Shoe connection. The system supports the recording of analog and digital audio signals on mixed or separate channels for maximum post-production flexibility. The receiver is ultra-compact and has output ports Built-in 3.5mm TRS and USB-C. Two side switches allow you to select recording from separate or mixed channels and switch between analog and digital output modes. Toggle security tracking recording to protect against unforeseen interruptions. An attenuator switch on the transmitter unit prevents clipping.

Bluetooth wireless communication
The units communicate with each other via Bluetooth 5.3 Low Energy LC3plus codec up to 492 feet away. The LC3 plus Bluetooth codec ensures low power consumption and low latency while maintaining high sound quality.

Multi Interface Shoe
Use the receiver's built-in Multi Interface Shoe for cable-free connection to your compatible Sony camera. The camera body can supply power to the receiver when connected. Audio is transmitted via direct digital signal for high-quality sound without transmission deterioration.

Digital Sound Recording
A digital MEMS microphone with a high signal-to-noise ratio is integrated into the transmitter to capture clear audio with low noise. You can further eliminate distortion by using the built-in noise cut and bass cut filters. The noise cut filter uses digital signal processing to remove interference, while the bass cut filter reduces unwanted low-frequency noise, such as wind, air conditioning units, and vibrations.

Clip-On Transmitter
Noise Cut Filter, Bass Cut Filter
Three attenuation settings: 0, 10 or 20 dB
3.5 mm TRS jack for external microphone input

Battery life
Each component has a built-in lithium-ion battery.
The transmitter can operate for six hours straight on a full charge.
Use the included charging case to recharge the components when you're on the go.

Component design
LED indicators on the receiver and transmitter indicate the status of communication and allow you to monitor battery levels. All components are designed to be moisture and dust resistant for outdoor shooting. The included furry windshields reduce wind noise.

Box Contents:
1x Sony ECM-W3S Wireless Microphone System with Multi Interface Shoe
1x Transmitter
1x Receiver
1x Charging Case
1x MI Shoe Cap
1x Furry windscreen
1x Bag